Multifunctional dovetail jig for variable pitch lapped or through dovetails.
For use with medium to heavy duty routers.
- Our DC400 dovetail centre is the breakthrough you have been waiting for.
It is the world's first variable layout dovetail jig that is completely free
of adjustment. You can change through dovetails to lapped dovetails, adjust
the pin and tail guide finger positions, change work-piece thickness all
without adjustment. Now you can have the professional look of hand cut
dovetails without the hassles of a complicated jig.
- Two guide rails provide full support for your router base, so you do not
have to balance your router on the edge of guide fingers as per conventional
jigs.
- Carbon fibre finger guides click directly into the rear guide rail,
engaging in an index strip at increments of 2.5mm. This guarantees true
repeatability and means you can restore or reposition guide fingers with
absolute accuracy.
- There are three types of pin guide; angled pin guides for cutting through
dovetail pins are available in five different angles from 7 up to 20 degrees.
Common fork-shaped tail guides for cutting through and lapped tails; and the
straight sided pin guides for cutting lapped pins.
- Fully enclosed body with a removable window ensures routed waste is
directed away from the operator and provides good visibility. The optional
snap-in waste collection kit will also remove almost 100% of the waste.
- Clamping channels with two independent parallel clamping bars require only
a single hand to operate, enabling the free hand to position the work-piece.
The clamping bars and integral side fences are positioned close to the
machining area, to ensure total security.
